Preparatory Work For The Installation Of Wooden Acoustic Panels

Preparatory work for the installation of wooden Acoustic panels

Structural walls should be pre-constructed in accordance with building codes, and the arrangement size of the keel must be compatible with the arrangement of the Acoustic panels. The distance between wooden keels should be less than 300mm, and the distance between light steel keels should not be more than 400mm. The installation of the keel should be perpendicular to the length of the Acoustic panel.

The distance from the surface of the wooden keel to the base layer is generally 50mm according to specific requirements; the flatness and verticality error of the edge surface of the wooden keel should not be greater than 0.5mm. If fillers are needed in the keel gap, they should be installed and processed according to the design requirements, and ensure that the installation of the Acoustic panels will not be affected.

Fixation of wooden sound-absorbing board keel:

The walls covered by wooden Acoustic panels must be installed with keels according to the requirements of the design drawings or construction drawings, and the keels must be leveled. The surface of the keel should be flat, smooth, free of rust and deformation.

Installation of wooden Acoustic panels:

The installation sequence of wooden Acoustic panels follows the principle of left to right and bottom to top. When the Acoustic panel is installed horizontally, the notch is upward; when it is installed vertically, the notch is on the right side. Some solid wood Acoustic panels have requirements for patterns, and each facade should be installed in order from small to large according to the numbers prepared in advance on the Acoustic panels.

Installation of wooden Acoustic panels (corner):

Inner corners (inner corners), close-fitting or fixed with 588 lines; outer corners (exterior corners), close-fitting or fixed with 588 lines.

Reminder: The wood Acoustic panel with solid wood veneer has color difference, which is a natural phenomenon. There may be a color difference between the paint finish of the wooden Acoustic panel and the hand-painted paint in other parts of the installation site. In order to keep the paint color consistent, it is recommended to adjust the hand-painted color of other parts of the installation site according to the pre-painted color of the wooden Acoustic panel after the wooden Acoustic panel is installed. .