
Lightweight Wood I-Joist
An I-beam is a beam structure with a cross-sectional shape resembling the letter “I,” composed of an upper flange at the top, a lower flange at the bottom, and a web connecting the two
Description
|
Product Name
|
||
|
Size
|
WEB
|
12MM/9MM OSB
|
|
Flange
|
63*45mm Pine LVL
|
|
|
|
|
|
|
Depth
|
240MM/300MM/310MM
|
|
|
Length
|
1000-12000MM
|
|
|
Material
|
WEB
|
OSB
|
|
Flange
|
Pine LVL
|
|
|
Glue
|
A-BOND Phenoic
|
|
|
Density
|
580-650kgs/cubic meter
|
|
|
Packing
|
Pallets packing,suitable for container loading and unloading
|
|
|
Delivery time and payment terms
|
Within 20 days after confirmed the order;
T/T 30% deposit in advance and 70%as the balance |
|
Core Product: I-Joist, Wood I-Beam, LVL Joist, Engineered Joist, Timber Beam
Material: LVL Flange, OSB Web, Solid Timber, Spruce-Pine-Fir, Plywood Web
Application: Floor Framing, Roof Rafter, Concrete Formwork, Shoring System, Deck Support
I-Joist Installation Guide:
Nailing:
Nail the I-joists to the top and bottom plates using appropriate nails (typically 8d or 10d common nails).
To prevent rotation and maintain spacing, install solid blocking (cross-bridging) or continuous rows of strapping on the bottom flanges.
Squash Blocks: In areas where a load-bearing wall sits directly above (perpendicular to) the I-joists below, install squash blocks (short pieces of 2x lumber or LVL) between the top and bottom flanges to transfer the vertical load without crushing the joist.
5. Cutting Holes (Web Penetrations)
This is the most common on-site adjustment. Rules vary by manufacturer, but general guidelines are:
The "No-Cut" Zone: Do not cut holes within 6 inches of a bearing wall or under point loads.
Hole Location:
Keep holes in the center 1/3 of the span.
Keep holes in the center 1/3 of the web depth (stay away from the top and bottom flanges).
Size & Shape: Round holes are strongest. If cutting a square or rectangular hole, the corners must be rounded to prevent stress cracks.
Spacing: Leave a distance equal to twice the longest hole diameter between adjacent holes.
Hot Tags: lightweight wood i-joist, China lightweight wood i-joist manufacturers, factory
Send Inquiry
You Might Also Like






